Amplifier – BaoFeng Radios https://baofengtech.com Purchase, Software, and Support for BaoFeng and BTECH Radios Mon, 07 Jun 2021 17:56:42 +0000 en-US hourly 1 https://wordpress.org/?v=5.8.1 https://baofengtech.com/wp-content/uploads/2020/11/cropped-BTechFinal-2-32x32.png Amplifier – BaoFeng Radios https://baofengtech.com 32 32 181510237 BTECH AMP-220 https://baofengtech.com/product/amp-220/ https://baofengtech.com/product/amp-220/#respond Mon, 24 Aug 2020 02:37:49 +0000 https://baofengtech.com//?post_type=product&p=2552 BTECH AMP-220 Amplifier for 1.25M (220-225MHz), 30-50W Output (2-6W Input), Analog and Digital Modes, Compatible with All Handheld Radios: BTECH, BaoFeng, Kenwood, Yaesu, ICOM, Motorola]]>

Technical Details:

• Frequency range:
◦ AMP-220 : 220 – 225 MHz
• Power supply: 13.8 VDC (±15%), 5.5 A maximum
• Input RF power: 2 – 6W (±10%)
• Output RF power: 30 – 50W
• Size: 5.5-in D x 4.5-in. W x 1.4-in. H (40 mm D x 115 mm W x 36 mm H)
• Net weight: 1.8 lbs. (800 g)

The BTECH AMP-25 Series is designed to work with any BaoFeng or BTECH handheld transceivers, but it will also work with any handheld radio that outputs 2 W – 6 W with the appropriate cable. With the included Radio to Amplifier RF Cable, the amplifier will also work with Wouxun transceivers, some TYT transceivers, and some Kenwood transceivers. If the supplied cables do not connect to your radio, you will need to use adaptors or build cables with the appropriate connectors.

Your BTECH AMP-25 amplifier does not include an antenna. It is very important to not transmit without an antenna or dummy load connected to the ANT connector on the rear panel of the amplifier.

Transmitting without an antenna or dummy load may cause harm to the radio equipment.

When choosing an antenna, make sure that it is suitable for the bands you plan on transmitting and receiving on. For example, if you plan on transmitting on 145MHz, make sure that the antenna you select has an SWR of 1.5:1 or less on that frequency. Using an antenna with an SWR greater than 1.5:1 could damage the amplifier.

If you plan to use a magnetically-mounted (mag-mount) antennas, ensure that the antenna is grounded to a metal surface, such as a vehicle body. Magnetically-mounted antennas do not operate properly without a good ground.

]]>
https://baofengtech.com/product/amp-220/feed/ 0 2552
BTECH AMP-U25D https://baofengtech.com/product/amp-u25d/ https://baofengtech.com/product/amp-u25d/#comments Mon, 24 Aug 2020 02:21:41 +0000 https://baofengtech.com//?post_type=product&p=2551 BTECH AMP-U25D Amplifier (Supports DMR) UHF (400-480MHz), 20-40W Output (2-6W Input), Analog and Digital Modes, Compatible with All Handheld Radios: BTECH, BaoFeng, Kenwood, Yaesu, ICOM, Motorola]]>
Style:AMP-U25D Analog & Digital  |  Size:UHF (400-480MHz)

Technical Details:

Frequency range:
◦ AMP-U25D : 400 – 480 MHz
Power supply: 13.8 VDC (±15%), 5.5 A maximum
Input RF power: 2 – 6W (±10%)
Output RF power: 20 – 40W
Size: 5.5-in D x 4.5-in. W x 1.4-in. H (40 mm D x 115 mm W x 36 mm H)
Net weight: 1.8 lbs. (800 g)

The BTECH AMP-25 Series is designed to work with any BaoFeng or BTECH handheld transceivers, but it will also work with any handheld radio that outputs 2 W – 6 W with the appropriate cable. With the included Radio to Amplifier RF Cable, the amplifier will also work with Wouxun transceivers, some TYT transceivers, and some Kenwood transceivers. If the supplied cables do not connect to your radio, you will need to use adaptors or build cables with the appropriate connectors.

Your BTECH AMP-25 amplifier does not include an antenna. It is very important to not transmit without an antenna or dummy load connected to the ANT connector on the rear panel of the amplifier.

Transmitting without an antenna or dummy load may cause harm to the radio equipment.

When choosing an antenna, make sure that it is suitable for the bands you plan on transmitting and receiving on. For example, if you plan on transmitting on 145MHz, make sure that the antenna you select has an SWR of 1.5:1 or less on that frequency. Using an antenna with an SWR greater than 1.5:1 could damage the amplifier.

If you plan to use a magnetically-mounted (mag-mount) antennas, ensure that the antenna is grounded to a metal surface, such as a vehicle body. Magnetically-mounted antennas do not operate properly without a good ground.

]]>
https://baofengtech.com/product/amp-u25d/feed/ 1 2551
BTECH AMP-U25 https://baofengtech.com/product/amp-u25/ https://baofengtech.com/product/amp-u25/#respond Mon, 24 Aug 2020 02:01:06 +0000 https://baofengtech.com//?post_type=product&p=2549 BTECH AMP-U25 Amplifier for UHF (400-480MHz), 20-40W Output (2-6W Input), Analog and Digital Modes, Compatible with All Handheld Radios: BTECH, BaoFeng, Kenwood, Yaesu, ICOM, Motorola]]>
Style:AMP-U25 Analog  |  Size:UHF (400-480MHz)

Technical Details:

• Frequency range:
◦ AMP-U25 : 400 – 480 MHz
• Power supply: 13.8 VDC (±15%), 5.5 A maximum
• Input RF power: 2 – 6W (±10%)
• Output RF power: 20 – 40W
• Size: 5.5-in D x 4.5-in. W x 1.4-in. H (40 mm D x 115 mm W x 36 mm H)
• Net weight: 1.8 lbs. (800 g)

The BTECH AMP-25 Series is designed to work with any BaoFeng or BTECH handheld transceivers, but it will also work with any handheld radio that outputs 2 W – 6 W with the appropriate cable. With the included Radio to Amplifier RF Cable, the amplifier will also work with Wouxun transceivers, some TYT transceivers, and some Kenwood transceivers. If the supplied cables do not connect to your radio, you will need to use adaptors or build cables with the appropriate connectors.

Your BTECH AMP-25 amplifier does not include an antenna. It is very important to not transmit without an antenna or dummy load connected to the ANT connector on the rear panel of the amplifier.

Transmitting without an antenna or dummy load may cause harm to the radio equipment.

When choosing an antenna, make sure that it is suitable for the bands you plan on transmitting and receiving on. For example, if you plan on transmitting on 145MHz, make sure that the antenna you select has an SWR of 1.5:1 or less on that frequency. Using an antenna with an SWR greater than 1.5:1 could damage the amplifier.

If you plan to use a magnetically-mounted (mag-mount) antennas, ensure that the antenna is grounded to a metal surface, such as a vehicle body. Magnetically-mounted antennas do not operate properly without a good ground.

]]>
https://baofengtech.com/product/amp-u25/feed/ 0 2549
BTECH AMP-V25D https://baofengtech.com/product/amp-v25d/ https://baofengtech.com/product/amp-v25d/#respond Mon, 24 Aug 2020 01:30:41 +0000 https://baofengtech.com//?post_type=product&p=2540 BTECH AMP-V25D Amplifier (Supports DMR) VHF (136-174MHz), 20-40W Output (2-6W Input), Analog and Digital Modes, Compatible with All Handheld Radios: BTECH, BaoFeng, Kenwood, Yaesu, ICOM, Motorola]]> Style:AMP-V25D Analog & Digital  |  Size:VHF (136-174MHz)

Technical Details:

• Frequency range:
◦ AMP-V25D : 136 – 174 MHz
• Power supply: 13.8 VDC (±15%), 5.5 A maximum
• Input RF power: 2 – 6W (±10%)
• Output RF power: 20 – 40W
• Size: 5.5-in D x 4.5-in. W x 1.4-in. H (40 mm D x 115 mm W x 36 mm H)
• Net weight: 1.8 lbs. (800 g)

The BTECH AMP-25 Series is designed to work with any BaoFeng or BTECH handheld transceivers, but it will also work with any handheld radio that outputs 2 W – 6 W with the appropriate cable. With the included Radio to Amplifier RF Cable, the amplifier will also work with Wouxun transceivers, some TYT transceivers, and some Kenwood transceivers. If the supplied cables do not connect to your radio, you will need to use adaptors or build cables with the appropriate connectors.

Your BTECH AMP-25 amplifier does not include an antenna. It is very important to not transmit without an antenna or dummy load connected to the ANT connector on the rear panel of the amplifier.

Transmitting without an antenna or dummy load may cause harm to the radio equipment.

When choosing an antenna, make sure that it is suitable for the bands you plan on transmitting and receiving on. For example, if you plan on transmitting on 145MHz, make sure that the antenna you select has an SWR of 1.5:1 or less on that frequency. Using an antenna with an SWR greater than 1.5:1 could damage the amplifier.

If you plan to use a magnetically-mounted (mag-mount) antennas, ensure that the antenna is grounded to a metal surface, such as a vehicle body. Magnetically-mounted antennas do not operate properly without a good ground.

]]>
https://baofengtech.com/product/amp-v25d/feed/ 0 2540
BTECH AMP-V25 https://baofengtech.com/product/amp-v25/ https://baofengtech.com/product/amp-v25/#comments Fri, 14 Aug 2020 22:18:34 +0000 https://baofengtech.com//?post_type=product&p=2200 BTECH AMP-V25 Amplifier for VHF (136-174MHz), 20-40W Output (2-6W Input), Analog and Digital Modes, Compatible with All Handheld Radios: BTECH, BaoFeng, Kenwood, Yaesu, ICOM, Motorola]]> Frequency range:
AMP-V25 : 136 – 174 MHz
Power supply: 13.8 VDC (15%), 5.5 A maximum
Input RF power: 2 – 6W (10%)
Output RF power: 20 – 40W
Size: 5.5-in D x 4.5-in. W x 1.4-in. H (40 mm D x 115 mm W x 36 mm H)
Net weight: 1.8 lbs. (800 g)

The BTECH AMP-25 Series is designed to work with any BaoFeng or BTECH handheld transceivers, but it will also work with any handheld radio that outputs 2 W – 6 W with the appropriate cable. With the included Radio to Amplifier RF Cable, the amplifier will also work with Wouxun transceivers, some TYT transceivers, and some Kenwood transceivers. If the supplied cables do not connect to your radio, you will need to use adaptors or build cables with the appropriate connectors.

Your BTECH AMP-25 amplifier does not include an antenna. It is very important to not transmit without an antenna or dummy load connected to the ANT connector on the rear panel of the amplifier.

Transmitting without an antenna or dummy load may cause harm to the radio equipment.

When choosing an antenna, make sure that it is suitable for the bands you plan on transmitting and receiving on. For example, if you plan on transmitting on 145MHz, make sure that the antenna you select has an SWR of 1.5:1 or less on that frequency. Using an antenna with an SWR greater than 1.5:1 could damage the amplifier.

If you plan to use a magnetically-mounted (mag-mount) antennas, ensure that the antenna is grounded to a metal surface, such as a vehicle body. Magnetically-mounted antennas do not operate properly without a good ground.

]]>
https://baofengtech.com/product/amp-v25/feed/ 2 2200