This is the BL-5 AA Battery Pack for BaoFeng UV-5R, UV-5X3, and BF-F8HP series radios.

It works on:
BF-F8HP
UV-5X3
UV-5R (every model UV-5RA, UV-5RB, UV-5RE – etc). Models with wider bases, such as the UV-5RA take a bit more effort to install the battery pack on (but will still work)

Specifications:
Size: 112mm x 48mm( Lx W)
Thickness: 16mm x 30mm
Weight (packaging weight excluded): 41g

How to use the BL-5 AA Battery Pack:
You can use 6 AA NiMh/ NiCd cells (1.2V) OR 5 AA Alkaline/ Zinc Carbon cells (1.5V) & 1 dummy AA (which is included).

**If you use 6 AA Alkaline or Zinc Carbon cells, the receiver works but the radio won’t transmit

Includes:
BL-5 AA Battery Case
1 Dummy AA (required for use with 5 Alkaline batteries)

This is the OEM spare or replacement battery for BaoFeng BF-F8HP, UV-5X3, and UV-5R series radios

It works on:

UV-5X3

BF-F8HP

UV-5R (every model UV-5RA, UV-5RB, UV-5Rv2 – etc)

This is the genuine eliminator with the full heavy duty cable and correct voltage transformer. Counterfeit eliminators send direct voltage which may damage your radio and will not let it function properly. Including: circuit damage and not allowing the radio to transmit while under high power, unregulated voltage

This is the battery eliminator for the BaoFeng BF-F8HP, UV-5X3, and UV-5R series radios. To use the eliminator simply clip it to the back of the radio in place of the battery, then plug the cable into a cigarette lighter or accessory socket (12V only).

This allows your radio to run off the vehicle or selected 12V source. The eliminator supplies power to the radio directly from car.

Technical Specs:
Over Current Protection Input : DC 12-24V
Output MAX :7.8V 3A

What’s Included:
++ Battery Eliminator for BaoFeng BF-F8 and UV-5R Series Radios

It works on:
UV-5X3
BF-F8HP
All UV-5R Series Radios (every model UV-5RA, UV-5RB, UV-5Rv2+, UV-5RS – etc)