This is the OEM spare or replacement battery for BaoFeng UV-82HP, GMRS-V1, MURS-V1, UV-82C, other UV-82 series radios.

It works on:
UV-82HP
GMRS-V1
MURS-V1
UV-82C
UV-82 (and original UV-82 variants)

John 14:6, our company theme and motto, on battery

This Speaker Mic (QHM22D) is the “HEAVY DUTY” version speaker mic you have been looking for! Compared to other BaoFeng mics this one is designed in the USA for construction sites, industrial use and for all rough assignments.

It is built with an impact resistant PVC casing (IP54), for Shock, wind, dust, and splash resistance. It is a High quality microphone with Crystal clear audio

Includes a heavy duty stainless steel clips on lapel. You’re free to talk without holding your radio. (with 8 adjustable positions)

Dual Push-To-Talk (PTT) Speaker Mic Designed for the UV-82 series radios (GMRS-V1, MURS-V1, UV-82HP, UV-82C, and other UV-82 series models)
The speaker mic includes dual push to talk buttons to operate with compatible radios (it is backwards compatible as a single PTT speaker mic with single push-to-talk radios)
. Speaker microphone Heavy Duty (built in 3.5 mm miniature earphone jack) for listen only earpiece

Dual PTT Features:
Has a remote microphone with Dual push to talk button – don’t mix up your conversations – the buttons coordinate with your display (on compatible UV-82 series radios)! The upper / top button will access the upper frequency, while the lower / side button will access the lower frequency on your radio.Package Includes:
*QHM22D Heavy Duty Speaker Mic

Compatible Radio Models:
BTECH: DMR-6X2, UV-5X3, GMRS-V1, MURS-V1
BaoFeng BF-F8HP, UV-5R Series, BF-888S, UV-3R+, UV-82C, UV-82HP, UV-82 Series
AnyTone AT-D878UV
TYT MD-380, TYT MD-390, TYT radios with Kenwood 2 Pin Standard
Arcshell AR-5, AR-6
Retevis H-777, RT-21
Radioddity GD-77
Kenwood Connector Compatible: All radios with the 2-pin K1 type connector (found in Wouxun, Arcshell, Kenwood, and other brands)

This is the OEM spare or replacement battery for BTECH and BaoFeng UV-82 series radios

It works on:
GMRS-V1
MURS-V1
UV-82HP
UV-82C
All UV-82 Series Radios

USB 2.1A, 1A, and .5A compatible.

Transforms USB power to the 10V DC input on BaoFeng & BTECH chargers

Compatible with all three CH-5 & CH-8 Charger Generations (sold from 2012 – Present); Some USB power transformers do not detect generation differences and oversupply voltage to older charger bases.

Great for use with automotive USBs, computer USBs, AC – USB adapters, and solar panel USB chargers.

Compatible with:
Chargers for all BaoFeng radios which use a 10V input such as: BF-F8HP, UV-82HP, UV-5X3, UV-5R, UV-5RA, etc…
If it uses a 10V input on the base with a standard 5.5MM DC Barrel plug (common on most BaoFeng chargers with barrel plugs)

NOT COMPATIBLE with: 12V charger bases (used on some variants of TYT chargers) or extended batteries (such as the BL-5L (which requires a smaller barrel and 7.4V))

Specification
Input: USB 5V (2.1A, 1A, and .5A)
Output: DC 9~10.8V (500mA)

This is the battery eliminator for the UV-82 (MURS-V1, GMRS-V1) series radios. To use the eliminator simply clip it to the back of the radio in place of the battery, then plug the cable into a cigarette lighter or accessory socket (12V only). This allows your radio to run off the vehicle or selected 12V source. The eliminator supplies power to the radio directly from car.

Technical Specs:
Over Current Protection Input : DC 12~24V
Output MAX :7.5V 3A
High efficient >90%, low heat dissipation

Whats Included:
1x Battery Eliminator for BaoFeng UV-82 Series Radios

It works on:
UV-82HP
GMRS-V1
MURS-V1
UV-82C
UV-82

Programming Help found at Miklor.com

This is the OEM AAA Battery Pack for UV-82 (MURS-V1 & GMRS-V1) series radios

It works on:
UV-82HP
GMRS-V1
MURS-V1
UV-82C
UV-82

Using the AAA Battery Pack:
· 6 AAA NiMh/ NiCd cells (1.2V)

OR · 5 AAA Alkaline/ Zinc Carbon cells (1.5V) & 1 dummy AAA (included)
If you use 6 AAA Alkaline or Zinc Carbon cells, the receiver works but the radio won’t transmit

Includes:
BL-8 AAA Battery Case
1 Dummy AAA (required for use with 5 Alkaline batteries)

Programming Help found at Miklor.com