The MURS-V1 is FCC certified (Part 95J) for use on MURS frequencies.

MURS channels do not share the same channels used by common walkie talkies or the store bought bubble pack children’s radios.

MURS is a private, two-way, short-distance voice or data communications service for personal or business activities of the general public.

The MURS-V1 is easy and straight forward to use. The MURS-V1 comes with 3 banks of the 5 MURS two-way channels pre-programmed (allowing shared frequencies separated by tones for different departments or users). You can easily modify the MURS-V1 to transmit a Privacy tone, right from the radio menu. You can even require a privacy tone for incoming transmissions. The MURS-V1 will save any modification to the channel (even during a reboot) and will remember any channel change you apply.

There is no guesswork involved anymore between brands. The MURS-V1 can work with any MURS radio – and has every single privacy tone option available (more than any other MURS radio). Even if other users don’t know which privacy tone is being used on their MURS radio; you are able to scan for which tone is being used. This ensures easy compatibility with all brands. The MURS-V1 has a high /low power toggle (2W High Power, 500mW low power)

You can modify the channel bandwidth for channels that are approved for either Narrowband or Wideband use. MURS 4 and MURS 5 (blue dot business and green dot business channels),

*** No license required to operate

The UV-82C (Commercial) comes with a Part 90 approved label. In order to be Part 90 approved the UV-82C comes with the VFO locked out and narrowband.

Compared to previous BaoFeng radios the UV-82C radios come with a much louder speaker (1 watt), a more solid case with larger buttons, and a new chipset and PCB board that outperforms the range, accuracy, and output of the previous BaoFeng chipsets. It is not simply a remake but a new radio from the ground up.

It outperforms the UV-5R chipset (in UV-5R series), and the 2nd Gen UV-5R chipset (in the GT-3 and BF-F8+)

Features:
25KHz/12.5KHz Switchable (Wide/Narrow Band)
FM Radio
LED Flashlight
Transmit Power Selectable (1W /5W)
50 CTCSS/ 104 DTCS Codes
Tone searching
Dual standby / Dual Watch
Transmitter time-out timer(TOT)
Busy channel lock-out

Specification:
Frequency Range: 65-108MHz(FM Receive only),136-174MHZ and 400-520MHZ (TX/RX)
Programmable Channels: 128
Antenna: High gain Dual Band
Operating Voltage: 7.4V
Modes: Simple or semi-duplex
Antenna: SMA-Female
Power adapter: Input:AC110V, 50-60Hz; Output: DC10V/500mA; Plug Type: US
Maximum deviation: 5kHz(Wide) / 2.5kHz(Narrow)
CTCSS/DCS deviation: 0.5±0.1kHz(Wide) / 0.3±0.1kHz(Narrow)

Includes:
UV-82C
7.4V 1800mAh Battery
Earpiece
Antenna
Charger and Adapter
Belt Clip
Hand Strap
User Manual
Help at Miklor.com

The BF-F8HP is the most powerful BaoFeng capable of transmitting 8 watts! A PC03 FTDI Programming Cable is Recommended for Easier PC Programming

The BF-F8HP is the third and final generation of the UV-5R. Some new features found in the BF-F8HP are the three selectable power levels (Low – 1w, Med – 4/5w, High-7/8w); the BF-F8HP has a better high-gain antenna (7″) that was not available in earlier models; the BF-F8HP also brings back the customizable tri-color display that was not found in second generation UV-5Rs. The BF-F8HP also comes with a Full IN-DEPTH 76 Page User Manual that will help you get aquatinted with all the New Features!

Much like its little brothers (the BF-F8+ and the UV-5R) the BF-F8HP maintains full cross accessory compatibility with all previous UV-5R accessories.

SPECIFICATIONS:
Color: Black
Model: New BAOFENG BF-F8HP
Battery: 2000mAh, 7.4v, Li-ion
Frequency Range: 65-108MHz (FM Receive only) 136-174MHz and 400-520MHz (TX/RX)
Antenna: High Gain Dual Band Antenna 7″ Antenna
Mode of operation: Simple or semi-duplex
Transmitter Output power: 8W/5W / 1W (Max 8W)
Modulation Mode: 16k F3E / 11k F3E
Maximum deviation: 5kHz(Wide) / <2.5kHz(Narrow) CTCSS/DCS deviation: 0.5+/-0.1kHz(Wide) / 0.3+/-0.1kHz(Narrow)
Intermediation distortion:

Included:
BF-F8HP
7.4V 2000mahvLi-ion Battery Pack
Antenna
Belt Clip
Hand Strap
Earphone
***NEW IN-Depth Manual
Desktop Charger (110V)

Programming Tips and Help Provided at Miklor.com

A PC03 Cable is Recommended for Easy PC Programming (CHIRP Supported)

Backward Compatible with UV-5R and BF-F8HP Accessories

New Features and Menus
Simultaneous Display: For those that want to have the most information at their fingertips – you can ‘Sync’ the dual displays to show both the name and frequency. This allows the displays to be synched to the same channel while browsing your channel memories.

Channel Skip: Easily add or remove a channel from the scanning list.

Frequency Scanning: When scanning in the Frequency (VFO) Mode, you can easily enter in the range and frequency steps that you want to scan without scanning the full frequency band.

ANI Updates: Along with being able to previously send ANI (Identification); You can now enable “Decoding” the ANI right on the display

Remote Commands: The UV-5X3 can respond to remote commands. By remotely sending DTMF tones you can both ‘Stun’ (Transmit Disable) or ‘Kill’ (Disables all functions) the radio. You also can ‘Revive’ a radio from its “stun” or “kill” state. You can also remotely turn on the microphone ‘Monitor’ or ensure the radio is within range ‘Inspect’ (replies with a confirmation tone within range).

In the Box:
UV-5X3 Radio
1500mAh Battery
V-85 Dual Band Antenna
220MHz Single Band Antenna
CH-5 Charger
CH-5 110V Adapter
Earpiece Kit
Wrist Strap
Belt Clip
User Manual

Technical
Memory channels: 128 Channels
Selective Calling Methods Supported: CTCSS, DCS, Tone Burst, DTMFs
Scanning Modes: Channel, Frequency, and Tone
Frequency step (kHz): 2.5K/5.0K/6.25K/10.0K/12.5K/20.0K/25.0K/50.0K
Power Output: High: 5W (VHF) / 4W (1.25M/UHF) – Low Power: 1W

Additional Technical Specifications:

General:
Frequency Range: 136-174MHz (V) , 400-480MHz (U)
Channel Capacity: 4000 channels
Channel Spacing: 25KHz (Wide Band) ,12.5KHz (Narrow Band)
Phase-locked Step: 5KHz, 6.25KHz
Operating Voltage: 7.4V DC 20%
Frequency Stability: 2.5ppm
Operating Temperature: -20℃~ +55℃
Size: 129×61×39mm (with battery pack)
Weight: 282g (with battery pack, antenna)

Receiver:
Sensitivity: (12dB SINAD) ≤0.25μV (WB), ≤0.35μV (NB)
Digital Sensitivity: 0.3uV/-117.4dBm (BER 5%); 0.7uV/-110dBm (BER 1%)
Adjacent Channel Selectivity: ≥70dB (WB) ≥60dB (NB)
Spurious Emission: ≤-57dB (WB) ≤-57dB (NB)
Spurious Rejection: ≥70dB (WB) ≥70dB (NB)
Blocking: 84db
Hum & Noise: ≥45dB (WB) ≥40dB(NB)
Audio Distortion: ≤5%
Audio Power Output: 1000mW/16Ω

Transmitter:
Power Output VHF: 7/5/2.5/1W, UHF: 6/5/2.5/1W
Modulation: 5.0KHz@25KHz (WB) 2.5KHz@12.5KHz (NB) Adjacent Channel Power: ≥70dB (WB) ≥60dB (NB)
Hum & Noise: ≥40dB (WB) ≥36dB (NB)
Spurious Emission: ≤-36dB (WB) ≤-36dB (NB)
4FSK Digital Modulation: 12.5KHz（data）7K60FXD; 12.5KHz（data+voice）7K60FXE
Audio Distortion: ≤5%
Error rate: ≤3%