The X-Series Mobiles also introduces our new dual sync mode! With this option, you can single or dual sync two different channels and display both their frequency and name simultaneously. If you prefer instead to monitor up to four channels; you can single line display a channel’s name or frequency. Additionally, as a new feature added: you can even monitor both VFO (frequency) and channel modes simultaneously.

Another feature introduced in the X-Series mobiles is the ability to edit your channel preferences without needing to program a new channel! You can edit tones, additional squelch information, and even add or remove it from your scanning list anytime!

Scanning channels and frequencies has now gotten even easier! A new menu allows you to select scanning resume methods. You can set the radio to start scanning immediately during reboot, resume scanning if you interrupt scanning to transmit, or start scanning soon as it powers on. The UV-25X2 will save your scanning preferences even with a power interruption. Frequency scanning has gotten a full overhaul; you can edit and scan through frequencies exactly as you prefer. Set your frequency range and frequency interval (step) right through the UV-25X2 on-screen interface.

You can adjust the Microphone Gain with the in-menu audio adjustments. The X-Series Mobiles include a 3.5mm Line In/Line Out multi-jack to allow remote audio input and output. (See manual for Jack Layout) *Requires TRRS Multi-jack speaker line, do not use a standard 3.5MM Mono Speaker-Out without an appropriate adaptor

The X-Series Mobiles also introduces our new dual sync mode! With this option, you can single or dual sync two different channels and display both their frequency and name simultaneously. If you prefer instead to monitor up to four channels; you can single line display a channel’s name or frequency.

Another feature introduced in the X-Series mobiles is the ability to edit your channel preferences without needing to program a new channel! You can edit tones, additional squelch information, and even add or remove it from your scanning list anytime!

Scanning channels and frequencies has now gotten even easier! A new menu allows you to select scanning resume methods. You can set the radio to start scanning immediately during reboot, resume scanning if you interrupt scanning to transmit, or start scanning soon as it powers on. The UV-25X4 will save your scanning preferences even with a power interruption. Frequency scanning has gotten a full overhaul; you can edit and scan through frequencies exactly as you prefer. Set your frequency range and frequency interval (step) right through the UV-25X4 on-screen interface.

You can adjust the Microphone Gain with the in-menu audio adjustments. The X-Series Mobiles include a 3.5mm Line In/Line Out multi-jack to allow remote audio input and output. (See manual for Jack Layout)

Bands: 136-174MHz (VHF), 220-260MHz (1.25M) (USA/ASIA), 350-390MHz (EU/ASIA), 400-520MHz (UHF)

Learn More at: baofengtech.com/uv-25×4

Output power:
2M: 25W (Peak), 20W (AVG) / Low: 10W
1.25M: 20W (Peak) 15W (AVG) / Low: 7W
70CM: 20W (Peak) 15W (AVG) / Low: 7W

The X-Series Mobiles also introduces our new dual sync mode! With this option, you can single or dual sync two different channels and display both their frequency and name simultaneously. If you prefer instead to monitor up to four channels; you can single line display a channel’s name or frequency. Additionally, as a new feature added: you can even monitor both VFO (frequency) and channel modes simultaneously.

Another feature introduced in the X-Series mobiles is the ability to edit your channel preferences without needing to program a new channel! You can edit tones, additional squelch information, and even add or remove it from your scanning list anytime!

Scanning channels and frequencies has now gotten even easier! A new menu allows you to select scanning resume methods. You can set the radio to start scanning immediately during reboot, resume scanning if you interrupt scanning to transmit, or start scanning soon as it powers on. The UV-50X2 will save your scanning preferences even with a power interruption. Frequency scanning has gotten a full overhaul; you can edit and scan through frequencies exactly as you prefer. Set your frequency range and frequency interval (step) right through the UV-50X2 on-screen interface.

You can adjust the Microphone Gain with the in-menu audio adjustments. The X-Series Mobiles include a 3.5mm Line In/Line Out multi-jack to allow remote audio input and output. (See manual for Jack Layout) *Requires TRRS Multi-jack speaker line, do not use a standard 3.5MM Mono Speaker-Out without an appropriate adaptor

The panel is separated from the main frame of the unit – allowing you to mount it in a different location (using standard ethernet cable (included)). The microphone can be connected to either the panel or radio body and the panel also has a mini-microphone built right in. With a variety of speaker options (including audio line-out); the UV-50X3 can easily adapt to any environment. The dual receivers have independent volume and control knobs to easily set your frequency and volume preferences.

Programming:
Manual Programming Capable (Watch our YouTube Tutorial)
PC/OSX/Linux Programming Capable – Uses CHIRP Software (Requires PC-05 Cable)

Technical Details:
1000 Channels (Right Bank: 500 Channels – Left Bank: 500 Channels)
8 Color Vibrant LCD Display
3 Loud Speakers (2 – Panel, 1 – Main Frame), AUX Audio Out Jack, AUX Audio In Jack
Tones: CTCSS / DCS / DTMF
Cross-band Repeater
RX: .5-1.710MHz (AM Radio), 76-108MHz (FM Radio), 108-136MHz (AM Aviation Band), 175-250MHz, 300-399MHz, 480-520MHz
RX/TX: 137-174MHz, 222-225MHz, 400-480MHz
Frequency Step: 2.5KHz/5KHz/6.25KHz/10KHz/12.5KHz/20KHz/25KHz
Audio Output: 2.5W X 3 Speakers
Power: 5W/20W/50W (1.25M 5W Max)
SO-239 Antenna Connector (Accepts PL-259 Coax)

In the Box:
UV-50X3 Main Frame, Front Panel, DTMF Microphone, Suction Cup, 10′ DC Cable, 15′ Panel Cable, Bracket, Fan Kit, Manual

Thorough Quality Control:
Each UV-50X3 is individually tested during extreme temperatures (-22 F) to ensure every radio can meet advertised performance requirements.

The GMRS-50X1 is FCC certified (Part 95E) for use on GMRS frequencies. The GMRS-50X1 is also FCC certified for VHF/UHF scanning capabilities (Part 15B)

The GMRS-50X1 comes with GMRS two-way and GMRS repeater channels pre-programmed. You can mix and match tones for repeater usage. The GMRS-50X1 will save any modification to the channel (even during a reboot) and will remember any channel change you apply in any mode.

Want to communicate with other GMRS users with other brand GMRS radios? There is no guesswork involved anymore between brands. The GMRS-50X1 can work with any GMRS radio – and has every single privacy tone option available (more than any other GMRS radio). Even if other users don’t know which privacy tone is being used on their GMRS radio; you are able to scan for which tone is being used. This ensures easy compatibility with all brands.

* Per FCC GMRS Radio Guidelines; Channels 1-7 are limited to Low Power – 5watt output

**Per FCC GMRS Mobile Radio Guidelines Channels 8-14 transmitting is disabled; they can receive and monitor communications, but GMRS mobile radios cannot transmit on these channels.

*** GMRS license required, easy to obtain (SAME DAY). The GMRS-50X1 operates on GMRS (General Mobile Radio Service) frequencies, which require an FCC (Federal Communications Commission) license. You must be licensed prior to transmitting.